Supercritical carbon dioxide (SC-CO2) jet is characterized by low rock breaking threshold pressure and high rock breaking rate. Swirling-round jet, taking the advantages of both swirling and round jet, enjoys high rock breaking efficiency. By integrating swirling-round jet and SC-CO2, it is prospective for swirling-round SC-CO2 jet to improve rock erosion efficiency further. Rock damage mechanisms of swirling-round SC-CO2 jet are investigated by means of rock-erosion experiments and scanning electron microscope (SEM) observation. The selected core samples include shale, dolomite as well as sandstone. For shale, no macro-deformation occurs and microscopic damage is discovered, forming tiny cracks. For dominate and sandstone, erosion holes form, and crystal particle cleavage as well as inter-particle rupture occur. According to the observation results, the rock damage mechanisms of swirling-round SC-CO2 jet are divided into two aspects. On the one hand, swirling-round SC-CO2 jet breaks rock by combining axial impinging, radical tension and circumferential shear. On the other hand, with characteristics of low viscosity, compressibility and strong diffusivity, numerous micro fractures are caused by SC-CO2, and existing fractures are expanded, which led to fractures joining together and massive rocks split off.
国家自然基金重大计划项目(51490652)
[1] Yan H B, Li M P, Zhang C J, et al. Research and application of cement slurry for long cementing section in ultra-deep well in Sichuan (in Chinese). Drilling Fluid Compl Fluid, 2011, 28: 55–57 [严海兵, 李美平, 张成金, 等. 四川超深井长封固水泥浆性能研究与应用. 钻井液与完井液, 2011, 28: 55–57]. Google Scholar
[2] Butler T, Fontana P. A method for combined jet and mechanical drilling. In: Proceedings of the SPE Annual Technical Conference and Exhibition. New Orleans: Society of Petroleum Engineers, 1990. Google Scholar
[3] Kolle J, Otta R, Stang D. Laboratory and field testing of an ultra-high-pressure, jet-assisted drilling system. In: Proceedings of the SPE/IADC Drilling Conference. Amsterdam: Society of Petroleum Engineers, 1991. Google Scholar
[4] Koll J, Marvin M. Jet-Assisted Drilling With Super Critical Carbon Dioxide. Reprot, Tempress Technologies, Houston, 2000. Google Scholar
[5] Liao H L, Li G S, Li J B, et al. Flow field study on integrating straight and swirling jets for radial horizontal drilling (in Chinese). J China Coal Soc, 2012, 37: 1895–1900 [廖华林, 李根生, 李敬彬, 等. 径向水平钻孔直旋混合射流喷嘴流场特性分析. 煤炭学报, 2012, 37: 1895–1900]. Google Scholar
[6] Li G S, Shen Z H, Xu Y J, et al. Advances in basic study on ultra-high pressure water jet assisted drilling (in Chinese). Pet Drilling Tech, 2005, 33: 20–23 [李根生, 沈忠厚, 徐依吉, 等. 超高压射流辅助钻井技术研究进展. 石油钻探技术, 2005, 33: 20–23]. Google Scholar
[7] Li G S, Shi H Z, Shen Z H, et al. Mechanisms and tests for hydraulic pulsed cavitating jet assisted drilling (in Chinese). Pet Explor Dev, 2008, 35: 239–243 [李根生, 史怀忠, 沈忠厚, 等. 水力脉冲空化射流钻井机理与试验. 石油勘探与开发, 2008, 35: 239–243]. Google Scholar
[8] Buckman Sr W G, Dotson T L, Mcdaniels M D, et al. Nozzle for jet drilling and associated method. US Patent, 6668948, 2003-12-30. Google Scholar
[9] Wu W, Li G S, Niu J L, et al. Experimental study on rock breaking parameters of combined swirling and round jet (in Chinese). Fluid Machinery, 2009, 37: 1–6 [吴为, 李根生, 牛继磊, 等. 直旋混合射流破岩钻孔参数试验研究. 流体机械, 2009, 37: 1–6]. Google Scholar
[10] Luo H B, Li G S, Song J, et al. Experimental study on rock breaking mechanism of coaxial swirling dual-jet (in Chinese). Chin J Rock Mech Eng, 2008, 27: 2754–2759 [罗洪斌, 李根生, 宋剑, 等. 同轴旋转双射流冲蚀岩石机制与实验研究. 岩石力学与工程学报, 2008, 27: 2754–2759]. Google Scholar
[11] Shen Z H, Wang H Z, Li G S. Feasibility analysis of coiled tubing drilling with supercritical carbon dioxide (in Chinese). Pet Explor Dev, 2010, 37: 743-747 CrossRef Google Scholar
[12] Wang H, Li G, Shen Z, et al. Experiment on rock breaking with supercritical carbon dioxide jet. J Pet Sci Eng, 2015, 127: 305-310 CrossRef Google Scholar
[13] Tian S C, Zhang Q L, Li G S, et al. Experimental study on rock-erosion features with combined swirling and round jet of supercritical carbon dioxide (in Chinese). Explosion Shock Waves, 2016, 36: 189–197 [田守嶒, 张启龙, 李根生, 等. 超临界CO2直旋混合射流破岩特性的实验研究. 爆炸与冲击, 2016, 36: 189–197]. Google Scholar
[14] Tian S, Zhang Q, Li G, et al. Experiment on rock-erosion features with combined swirling and round jet of supercritical carbon dioxide under the ambient pressure condition. Atomization & Sprays, 2015, 26: 259–271. Google Scholar
[15] Sondergeld C H, Ambrose R J, Rai C S, et al. Micro-structural studies of gas shales. In: Proceedings of the SPE Unconventional Gas Conference. Pittsburgh: Society of Petroleum Engineers, 2010. Google Scholar
[16] Slatt R M, O’Brien N R. Pore types in the Barnett and Woodford gas shales: Contribution to understanding gas storage and migration pathways in fine-grained rocks. Bulletin, 2011, 95: 2017-2030 CrossRef Google Scholar
[17] Ji L, Zhang T, Milliken K L, et al. Experimental investigation of main controls to methane adsorption in clay-rich rocks. Appl Geochem, 2012, 27: 2533-2545 CrossRef Google Scholar
[18] Curtis M E, Sondergeld C H, Ambrose R J, et al. Microstructural investigation of gas shales in two and three dimensions using nanometer-scale resolution imaging. Bulletin, 2012, 96: 665-677 CrossRef Google Scholar
[19] Cai C, Li G, Huang Z, et al. Experimental study of the effect of liquid nitrogen cooling on rock pore structure. J Natural Gas Sci Eng, 2014, 21: 507–517. Google Scholar
[20] Zeng J, Kim T. Material removal of polycrystalline ceramics by a high pressure abrasive water jet—A SEM study. Int J Water Jet Technol, 1991, 1: 65–71. Google Scholar
[21] Li G S, Liao H L. Micro-failure mechanism analysis and test study for rock failure surface under water jet impact (in Chinese). Chin J High Pressure Phys, 2005, 19: 337–342 [李根生, 廖华林. 超高压水射流冲蚀切割岩石断口微观断裂机理实验研究. 高压物理学报, 2005, 19: 337–342]. Google Scholar
[22] Sun Z, Kang X, Wang X. Experimental system of cavitation erosion with water-jet. Mater Design, 2005, 26: 59–63. Google Scholar
[23] Russo M. Analysis of Fractures Utilizing the SEM. Metallography in Failure Analysis. New York: Springer, 1978. 65–95. Google Scholar
[24] Nemati K M. Fracture analysis of concrete using scanning electron microscopy. Scanning, 1997, 19: 426–430. Google Scholar
[25] Li X W, Lan Y R, Zou J X. Rock fracture analysis (in Chinese). China Univ Mining Tech, 1983, 1: 18–24 [李先炜, 兰勇瑞, 邹俊兴. 岩石断口分析. 中国矿业大学学报, 1983, 1: 18–24]. Google Scholar
[26] Cui Y X, Wang C L. Metal Fracture Analysis (in Chinese). Harbin: Harbin Institute of Technology, 1998. 52–73 [崔约贤, 王长利. 金属断口分析. 哈尔滨: 哈尔滨工业大学出版社, 1998. 52–73]. Google Scholar
[27] Tian S, He Z, Li G, et al. Influences of ambient pressure and nozzle-to-target distance on SC-CO2 jet impingement and perforation. J Nat Gas Sci Eng, 2016, 29: 232-242 CrossRef Google Scholar
[28] Liao C H, Huang Z R. Supercritical CO2 Fluid Extraction Technology (in Chinese). Beijing: Chemical Industry Press, 2005. 17–22 [廖传华, 黄振仁. 超临界CO2流体萃取技术. 北京: 化学工业出版社, 2005. 17–22]. Google Scholar
[29] Han B X. Science and Technology of Supercritical Fluid (in Chinese). Beijing: China Petrochem Press, 2005. 2–5 [韩布兴. 超临界流体科学与技术. 北京: 中国石化出版社, 2005. 2–5]. Google Scholar
[30] He Z, Li G, Tian S, et al. SEM analysis on rock failure mechanism by supercritical CO2 jet impingement. J Pet Sci Eng, 2016, 146: 111-120 CrossRef Google Scholar
Copyright 2019 Science China Press Co., Ltd. 科学大众杂志社有限责任公司 版权所有
京ICP备18024590号-1
Download PDF