Numerical study on the mechanism of fluid flow through single rough fractures with different JRC

logo

SCIENTIA SINICA Physica, Mechanica & Astronomica, Volume 49, Issue 1: 014701(2019) https://doi.org/10.1360/SSPMA2018-00247

Numerical study on the mechanism of fluid flow through single rough fractures with different JRC

More info
  • ReceivedJul 4, 2018
  • AcceptedAug 15, 2018
  • PublishedOct 18, 2018
PACS numbers

Abstract

The permeability theory of fractured rock mass has a wide range of engineering applications. The surface roughness and structure tortuosity have a significant effect on the character of fluid flow through the fracture. Based on the standard fracture curves with different JRC values given by Barton (1977), a rough single fracture model is constructed. A detailed mechanism study on the effect of roughness and tortuosity on fluid flow is carried out on the single fracture model. A code for simulating the flow in the fractures based on the lattice Boltzmann method was programmed and verified. Using this code, numerical simulations are performed on single fracture models with different JRC values and apertures. Physical properties like the velocity field of the flow are observed and analyzed. Comparing the simulation results with the tortuosity modified the cubic law of single fracture flow (LCL), it is found that the cubic law prediction has a certain deviation on the flow rate. The analysis emphasizes that in the single rough fracture, two factors of tortuosity and roughness act simultaneously on the penetration, and these two factors are coupled that they can transform from one to the other as the aperture changes. Therefore, it is necessary to consider both the tortuosity and the rough effect and implement the two factors to modify the local cubic law for single fracture permeability. The modified model shows the result which is relatively more accurate in predicting the flux through rough single fractures. It is convinced that the research is engineering valuable.


Funded by

国家自然科学基金(5172780711772064)

中央高校基本科研业务费专项资金


References

[1] Neuman S P. Trends, prospects and challenges in quantifying flow and transport through fractured rocks. Hydrogeol J, 2005, 13: 124-147 CrossRef ADS Google Scholar

[2] Xiong X B, Zhang C H, Wang E Z. A review of steady state seepage in a single fracture of rock (in Chinese). Chin J Rock Mech Eng, 2009, 28: 1839–1847 [熊祥斌, 张楚汉, 王恩志. 岩石单裂隙稳态渗流研究进展. 岩石力学与工程学报, 2009, 28: 1839–1847]. Google Scholar

[3] Zhu H G, Xie H P, Yi C, et al. Analysis of properties of fluid flow in rock fractures (in Chinese). Chin J Rock Mech Eng, 2013, 32: 657–663 [朱红光, 谢和平, 易成, 等. 破断岩体裂隙的流体流动特性分析. 岩石力学与工程学报, 2013, 32: 657–663]. Google Scholar

[4] Odling N E, Gillespie P, Bourgine B, et al. Variations in fracture system geometry and their implications for fluid flow in fractures hydrocarbon reservoirs. Pet Geosci, 1999, 5: 373-384 CrossRef Google Scholar

[5] Ju Y, Zhang Q G, Yang Y M, et al. An experimental investigation on the mechanism of fluid flow through single rough fracture of rock. Sci China Tech Sci, 2013, 56: 2070-2080 CrossRef Google Scholar

[6] Qian J, Chen Z, Zhan H, et al. Experimental study of the effect of roughness and Reynolds number on fluid flow in rough-walled single fractures: A check of local cubic law. Hydrol Process, 2011, 25: 614-622 CrossRef ADS Google Scholar

[7] Snow D T. A parallel plate model of fractured permeable media. Dissertation for Doctoral Degree. Berkeley: University of California, 1965. Google Scholar

[8] Snow D T. Closure on rock fracture spacings, openings, and porosities. J Soil Mech Foundat Div, 1969, 95: 880–883. Google Scholar

[9] Brown S R. Fluid flow through rock joints: The effect of surface roughness. J Geophys Res, 1987, 92: 1337-1347 CrossRef ADS Google Scholar

[10] Sun H, Faghri M. Effect of surface roughness on nitrogen flow in a microchannel using the direct simulation Monte Carlo method. Numer Heat Transfer Part A-Appl, 2003, 43: 1-8 CrossRef Google Scholar

[11] Zhang T, Jia L. Numerical simulation of roughness effect on gaseous flow and heat transfer in microchannels. In: IEEE International Conference on Nano/micro Engineered and Molecular Systems. Bangkok: IEEE, 2007. 136–141. Google Scholar

[12] Amini H, Sollier E, Masaeli M, et al. Engineering fluid flow using sequenced microstructures. Nat Commun, 2013, 4: 1826 CrossRef PubMed ADS Google Scholar

[13] Zhang G, Feng C Y, Gong W B, et al. Simulation and analysis of the effect of roughness elements on fluid flow through single fracture based on lattice Boltzmann method (in Chinese). Sci Sin-Phys Mech Astron, 2017, 47: 024701 CrossRef ADS Google Scholar

[14] Cai J, Hu X, Standnes D C, et al. An analytical model for spontaneous imbibition in fractal porous media including gravity. Colloids Surfs A-Physicochem Eng Aspects, 2012, 414: 228-233 CrossRef Google Scholar

[15] Ju Y, Zhang Q, Zheng J, et al. Fractal model and lattice Boltzmann method for characterization of non-Darcy flow in rough fractures. Sci Rep, 2017, 7: 41380 CrossRef PubMed ADS Google Scholar

[16] Barton N, Choubey V. The shear strength of rock joints in theory and practice. Rock Mech, 1977, 10: 1-54 CrossRef ADS Google Scholar

[17] Barton N. Suggested methods for the quantitative description of discontinuities in rock masses. ISRM, Int J Rock Mech Mining Sci Geomech Abstracts, 1978, 15: 319–368. Google Scholar

[18] Tse R, Cruden D M. Estimating joint roughness coefficients. Int J Rock Mech Min Sci Geomech Abstracts, 1979, 16: 303-307 CrossRef Google Scholar

[19] Turk N, Dearman W R. Investigation of some rock joint properties: Roughness angle determination and joint closure. In: Proceedings of international symposium on fundamentals of rock joints. 1985. 197--204. Google Scholar

[20] Wang Q. Study on rock joint roughness coefficient using elongation rate (in Chinese). In: Selected Works of Under-ground Engineering Experience Exchange, 1982 [王岐. 用伸长率R确定岩石节理粗糙度系数的研究. 见: 地下工程经验交流会论文选集, 1982]. Google Scholar

[21] Lee Y H, Carr J R, Barr D J, et al. The fractal dimension as a measure of the roughness of rock discontinuity profiles. Int J Rock Mech Min Sci Geomech Abstracts, 1990, 27: 453-464 CrossRef Google Scholar

[22] Succi S. The Lattice Boltzmann Equation for Fluid Dynamics and Beyond. New York: Princeton University Press, 2001. Google Scholar

[23] He Y L, Wang Y, Li Q. Theory and Application of Lattice Boltzmann Method (in Chinese). Beijing: Science Press, 2009 [何雅玲, 王勇, 李庆. 格子Boltzmann方法的理论及应用. 北京: 科学出版社, 2009]. Google Scholar

[24] Eker E, Akin S. Lattice Boltzmann simulation of fluid flow in synthetic fractures. Transp Porous Media, 2006, 65: 363-384 CrossRef Google Scholar

[25] Louis C. Rock Hydraulics in Rock Mechanics. New York: Spring-Verlag, 1974. Google Scholar

[26] Lomize G M. Flow in Fractured Rock. Moscow City: Gosemergoizdat, 1951. Google Scholar

[27] Rose W, Bruce W A. Evaluation of capillary character in petroleum reservoir rock. J Pet Tech, 1949, 1: 127-142 CrossRef Google Scholar

[28] Walsh J B, Brace W F. The effect of pressure on porosity and the transport properties of rock. J Geophys Res, 1984, 89: 9425-9431 CrossRef ADS Google Scholar

[29] Ge S M. A governing equation for fluid flow in rough fractures. Water Resour Res, 1997, 33: 53-61 CrossRef ADS Google Scholar

[30] Waite M E, Ge S, Spetzler H. A new conceptual model for fluid flow in discrete fractures: An experimental and numerical study. J Geophys Res, 1999, 104: 13049-13059 CrossRef ADS Google Scholar

[31] Qian Y H, D’Humières D, Lallemand P. Lattice BGK models for Navier-Stokes equation. Europhys Lett, 1992, 17: 479-484 CrossRef ADS Google Scholar

[32] Lavallée P, Boon J P, Noullez A. Boundaries in lattice gas flows. Physica D, 1991, 47: 233-240 CrossRef ADS Google Scholar

[33] Chen S, Martínez D, Mei R. On boundary conditions in lattice Boltzmann methods. Phys Fluids, 1996, 8: 2527-2536 CrossRef ADS Google Scholar

Copyright 2019 Science China Press Co., Ltd. 科学大众杂志社有限责任公司 版权所有

京ICP备18024590号-1